Difference between revisions of "Talk:Laser Cutter/Instructions/Photo Engraving"
Jump to navigation
Jump to search
(Added links.) |
KantPredict (talk | contribs) |
||
| Line 7: | Line 7: | ||
Why matching Resolution to ScanGap helps: | Why matching Resolution to ScanGap helps: | ||
http://diylaser.blogspot.co.uk/2011/09/laser-engraving-and-dpi-scan-gap.html%7C | http://diylaser.blogspot.co.uk/2011/09/laser-engraving-and-dpi-scan-gap.html%7C | ||
| + | |||
| + | [[Used:CDave]] - I took out the links primarily because they pointed to non-existant blog posts, although the now one about dithering/burns is there now. | ||
| + | Mostly though, I was detailing my experiences with our software and hardware and the different settings that I have experimented with thus far. And the page is not complete yet! | ||
Revision as of 22:04, 2 June 2014
User:KantPredict Reverting edits is not a minor change.
The links you removed may be helpful to people working on photo realistic engraving:
Adding shades by clever dithering and burns http://blog.aaronbot3000.com/2013/05/a-guide-to-better-dithering-on-laser.html
Why matching Resolution to ScanGap helps: http://diylaser.blogspot.co.uk/2011/09/laser-engraving-and-dpi-scan-gap.html%7C
Used:CDave - I took out the links primarily because they pointed to non-existant blog posts, although the now one about dithering/burns is there now. Mostly though, I was detailing my experiences with our software and hardware and the different settings that I have experimented with thus far. And the page is not complete yet!