Difference between revisions of "Talk:Laser Cutter/Instructions/Photo Engraving"

From London Hackspace Wiki
Jump to: navigation, search
m
(Corrected URLs)
 
Line 1: Line 1:
[[User:KantPredict]] Reverting edits is not a minor change.
+
Corrected those URLs. Cheers. https://wiki.london.hackspace.org.uk/view/Laser_Cutter/Instructions#Engraving_Hints.2C_Tips.2C_and_References
 
 
The links you removed may be helpful to people working on photo realistic engraving:
 
 
 
Adding shades by clever dithering and burns http://blog.aaronbot3000.com/2013/05/a-guide-to-better-dithering-on-laser.html
 
 
 
Why matching Resolution to ScanGap helps:
 
http://diylaser.blogspot.co.uk/2011/09/laser-engraving-and-dpi-scan-gap.html%7C
 
 
 
[[Used:CDave]] - I took out the links primarily because they pointed to non-existant blog posts, although the new one about dithering/burns is there now.  
 
Mostly though, I was detailing my experiences with our software and hardware and the different settings that I have experimented with thus far. And the page is not complete yet!
 

Latest revision as of 09:13, 3 June 2014