User:YOPERO

@yopero

Hacking Interfacing the Boxford 190VMC

15/09/2014

Long ago this CNC was controlled by a BBC Master from Acorn.

I just found a disk with the software used to control the Boxford 125 tcl lathe that happens to have a very similar electronic board as the 190VMC. To emulate the BBC master on a Windows7 sytem I have used "BeebEm 414"--->http://www.mkw.me.uk/beebem/ and the disk can be downloaded from here: https://groups.google.com/group/london-hack-space/attach/8f627b29677a61fb/Boxford200K.ssd?part=0.1&authuser=0&view=1

It could be a starting point for decoding the initial handshake to control the drivers. The documentation suggests that it uses standard gcode (ISO)---> http://tturkyilmaz.home.anadolu.edu.tr/dersler/telatturkyilmaz/programlar/cnc/millcamakz/millcam.pdf

Yesterday I was able to connect to the cnc via serial(b:9600 d:8 s:1 p:none) and get its model but could find any code that actually moves the motors.

18/09/2014

DataSheets for the existig electronics

• DS80C310 High-Speed Microcontroller, driving each motor:

https://drive.google.com/file/d/0BwcYiBsr3w5_NWk3LTRhMXI5bUE/edit?usp=sharing

• Lense Speed controllers 530 series Spindle:

https://drive.google.com/file/d/0BwcYiBsr3w5_bzZWSzBPQU5LbjQ/edit?usp=sharing

• GS-D200S 2/2.5A BIPOLAR STEPPER MOTOR DRIVE MODULES

https://drive.google.com/file/d/0BwcYiBsr3w5_Yjh6UWN2NklVMmc/edit?usp=sharing

• microstepping

https://drive.google.com/file/d/0BwcYiBsr3w5_VURPR1Z1cFJlOTA/edit?usp=sharing

http://www.nmbtc.com/step-motors/engineering/full-half-and-microstepping/

• Serial cabling db25 and db9

http://www.lammertbies.nl/comm/cable/RS-232.html https://drive.google.com/file/d/0BwcYiBsr3w5_MlIyRWlRSFA5ejA/edit?usp=sharing http://www.lammertbies.nl/comm/cable/RS-232.html

[[ ]]

The cnc sends 5 blocks of 7 chars, the structure as follows:

P000000// Z axis

p000000// feed rate

 s 0000// spindle rpm

00000E5// X axis

@000000// Y axis