View source for Project:Java-Rako/Published API

{{Project}}

=TCP/IP=
In the following examples the NetBios name for the bridge is assumed to be '''rakobridge'''
(the default). This name can be changed using the web interface or the IP address of the
bridge can be used.

==Telnet==
A Telnet type interface is available on port 9761. This does not require a login. The
protocol is the same as the [http://www.rakocontrols.com/downloads/rakors232commandsummary.pdf Rako RS232 Command Summary]. This interface is used by
Rasoft so CANNOT be used at the same time.

The interface can be used by typing:

    telnet rakobridge 9761

==HTTP==
Requests can be made via the web interface by submitting a HTTP GET request in the
following format:

    http://rakobridge/rako.cgi?room=5&ch=4&com=3

The example would send Scene 1 command to room 5, channel 4. If channel is omitted it will default to 0 meaning all channels. A page containing the phrase "Success!" is returned.

=UDP/IP=
UDP packets can be sent to port 9761 with the following format:
    

{| border="1"
|-
|0||1||2||3||4||5||6 ...||n
|-
|"R"||#Bytes to follow||Room# high||Room# low||Channel #||Instruction||0-7 bytes||CRC
|-
|}


Sum of these bytes must equal zero.

The reply is either "AOK" or "AERROR"