Project:Raspberry Pi Laserccut Case
From London Hackspace Wiki
Case created in inkscape, export to dxf using mm scale to use on the lasercutter, not allowed to upload .dxf files so you will have to make them in inkscape.
Version 1
This is a tight fit so if you glue it your pi may not pull out.
Cad files can be found here
https://docs.google.com/file/d/0B5jMr424iIgFdDRZaVVrYWw0MW8/edit?usp=sharing
https://docs.google.com/file/d/0B5jMr424iIgFT2dtUTBCRDUwS2c/edit?usp=sharing
https://docs.google.com/file/d/0B5jMr424iIgFV3I5eGtrXzFPTGs/edit?usp=sharing
https://docs.google.com/file/d/0B5jMr424iIgFZ1huT0FicUZndk0/edit?usp=sharing
