Project:Deactivating a ferric chloride solution: Difference between revisions

From London Hackspace Wiki

Line 1: Line 1:
Project maintained by Daniel Sikar ~/ dsikaratgmaildotcom.
Project maintained by Daniel Sikar ~/ dsikaratgmaildotcom.


== Deactivating a Ferric Chloride solution ==
== Deactivating a ferric chloride solution ==
=== In practice ===
=== In practice ===


* Example
* Example


A solution that was made with a packet of Ferric Chloride (FeCl<sub>3</sub>) crystals weighing 300 grams requires 222 grams of Sodium Hydroxide (NaOH) to be deactivated.
A solution that was made with a packet of ferric chloride (FeCl<sub>3</sub>) crystals weighing 300 grams requires 222 grams of sodium hydroxide (NaOH) to be deactivated.


After deactivation, the neutralised solution will contain Iron Hydroxide (Fe(OH)<sub>3</sub>) which is rust and Sodium Chloride (NaCl) which is common table salt.
After deactivation, the neutralised solution will contain iron hydroxide (Fe(OH)<sub>3</sub>) which is rust and sodium chloride (NaCl) which is common table salt.


Both are innocuous and can be poured down the drain.
Both are innocuous and can be poured down the drain.
Line 14: Line 14:
* Method
* Method


Pour the spent Ferric Chloride solution in a plastic bucket - do not use metal buckets, add about 5 times its volume of water.
Pour the spent ferric chloride solution in a plastic bucket - do not use metal buckets, add about 5 times its volume of water.
Dissolve 222 grams of Sodium Hydroxide in about 3 litres of water.
Dissolve 222 grams of sodium hydroxide in about 3 litres of water.


In a thin stream, add the Sodium Hydroxide solution to the Ferric Chloride and stir. Once it turns rust coloured it is ready to be
In a thin stream, add the sodium hydroxide solution to the ferric chloride and stir. Once it turns rust coloured it is ready to be
discarded.
discarded.


If not discarded, on standing, the Iron Hydroxide will separate out at the bottom, while at the top, a crust of Copper Carbonate (CuCO<sub>3</sub>) will form due to the copper from etched circuits.
If not discarded, on standing, the iron hydroxide will separate out at the bottom, while at the top, a crust of copper carbonate (CuCO<sub>3</sub>) will form due to the copper from etched circuits.


The Iron Hydroxide at the bottom is a standard commercial pigment and can be separated off the solution and added to latex paint.
The iron hydroxide at the bottom is a standard commercial pigment and can be separated off the solution and added to latex paint.


[[File:Deactivated_FeCl3_Solution.jpg|200px]]
[[File:Deactivated_FeCl3_Solution.jpg|200px]]
Anonymous user