|
|
Line 1: |
Line 1: |
| [[File:Hacksat1-mission-patch.png|right]] | | [[File:Hacksat1-mission-patch.png|right]] |
|
| |
|
| '''See https://flux.org.uk/projects/hacksat/ for latest info. Dev board should be going to board house imminently. Flux will update the wiki in July 2013.'''
| | Development is well under way. Apologies for lack of wiki update, check back soon. |
|
| |
|
| '''HackSat1''' will be a sprite: a tiny independent satellite. It's due to launch in 2013 as part of the [http://kicksat.org KickSat] swarm. The primary goal of the project is to receive signals from HackSat1 at a [[Project:Hoxton Space Centre|ground station]] in the [[Laboratory 24|London Hackspace, Hoxton]]. In the longer term we hope to design and launch our own hardware.
| | In the meantime see https://flux.org.uk/projects/hacksat/ for latest info. |
| | |
| All the sprites in the KickSat swarm will have the same hardware design. So focus is on the software and ground station. Speak to [[User:Flux|Flux]] if you're interested in getting involved.
| |
| | |
| == Current Activities ==
| |
| * Messing around with a [http://www.ti.com/LaunchPad TI LaunchPad] and learning the basics of [http://www.ti.com/msp430 MSP430]. See also [[MSP430 Mac Howto]].
| |
| * Working out the [[Project:HackSat1 Payload|payload]]
| |
| * Working out what's needed for [[Project:Hoxton Space Centre|Hoxton Space Centre]] (ground station)
| |
| | |
| == Sprite Hardware ==
| |
| We don't get to design the hardware on this mission, just program it. The current KickSat code is available on [https://github.com/zacinaction/kicksat GitHub]. Development of HackSat specific code is due to being summer 2012.
| |
| | |
| * MSP430 controller: [http://www.ti.com/product/cc430f6137 CC430F6137] (16-Bit Ultra-Low-Power MCU, 32KB Flash, 4KB RAM, CC1101 Radio, AES-128, 12Bit ADC, USCI, LCD driver)
| |
| * sensors: temperature + one other TBC (KickSat are taking suggestions)
| |
| ** According to a [http://www.kickstarter.com/projects/zacinaction/kicksat-your-personal-spacecraft-in-space/posts/247545 kickstarter update], the latest dev boards have a magnetometer and a gyro onboard. No mention of the temperature sensor. (The MCU has a temperature sensor build-in)
| |
| * radio: we can transmit what and when we like (subject to solar power) but data rate is only a few bits per second
| |
| **Signals cannot be sent to the sprite: communication is strictly one way (from sprite to ground station)
| |
| | |
| ''"For sensors, basically they have to be packaged in a tiny SMT chip and not use too much power (no more than a few mW). We don't have a list yet, but one example of something that would work is this magnetometer: http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/Magneto/HMC5883L-FDS.pdf"''
| |
| | |
| == The Launch ==
| |
| July 2013 on Space X Falcon 9 rocket as part of ELaNa 5 / CRS 3.
| |
| | |
| == The Orbit ==
| |
| ''"While we don't know the orbit, we're aiming for a circular low altitude LEO - around 300 km. altitude. That would mean a roughly 90 minute orbit with several daylight passes per day (usually 3 or 4 over any given location). Each pass would be somewhere around 5 minutes long."''
| |
| | |
| At that (low) a height - the orbit repeat cycle would really matter quite a bit; i.e. how many days before it passes within line of sight of a given ground station; and is there enough power to survive across such cycles; or if not - is there enough to be 'on' when doing an overpass (in daylight). The basic concept that as it circles earth in a bit over 90 minutes; each pass is a couple of degrees westward (on the illuminated side of earth usually) - returning to roughly the same orbit after a couple of days/weeks. Key is then having (had) enough power to charge any batteries to be able to power up the transmitter (and generally not having enough time/power to establish position - so you need to do this a lot - in a hit and run mode looking for the elusive ground station and then offload your wares quickly -- within the 10's of seconds you have (left).
| |
| | |
| B.t.w. [http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=4526281 "Criteria and Trade-offs for LEO Orbit Design" in IEEE Xplore] has a pretty good overview.
| |
| | |
| == Useful Resources ==
| |
| * [http://hackaday.com/2011/11/21/tracking-satellites-with-an-arduino/ Tracking satellites with an Arduino]
| |
| [[Category:Satellites|H]]
| |
| * [http://events.ccc.de/congress/2011/Fahrplan/events/4699.en.html Building a Distributed Satellite Ground Station Network - A Call To Arms]
| |
|
| |
|
| ''Mission patch created by Nick Cramp.'' | | ''Mission patch created by Nick Cramp.'' |
|
| |
|
| [[Category:Projects]] | | [[Category:Projects]] |