146
edits
Laser Cutter/Instructions: Difference between revisions
From London Hackspace Wiki
→Engraving: Added links to some tutorials.
(→Uploading your data file: Added line about "soft stop" errors) |
(→Engraving: Added links to some tutorials.) |
||
| Line 47: | Line 47: | ||
==Engraving== | ==Engraving== | ||
* Try to align the bulk of the engraving with the short axis (y), the laser cutter seems to do passes in this direction only so if you have it aligned to the long (x) axis it will do many short passes rather than fewer longer ones, this can '''massively''' increase engraving time (minutes -> hours) | |||
* Rather than slow down/increase power there is a setting to repeat a layer multiple times, this is very useful if using the engrave option to reach a certain depth. | |||
* For fast prototypes the engraving step size can be changed (default is 0.1mm) a setting of 0.2 is good for depth engraving, again this can speed up the process a lot. | |||
** Images will work best if [http://diylaser.blogspot.co.uk/2011/09/laser-engraving-and-dpi-scan-gap.html| DPI is matched to the Scan Gap] | |||
** One way to prepare images is to reduce the image to black and white [http://blog.aaronbot3000.com/2013/05/a-guide-to-better-dithering-on-laser.html| using dithering]. | |||
*** For wood, etching makes things darker, but for acrylic, etching makes things lighter. | |||
* '''Note''' if something hasn't cut/engraved to the complete depth (or you just want to run it again) it is possible to select which layers are 'output' by scrolling to the right in the layers box, this is very useful for an extra layer of engraving or to confirm a full cut. DON'T move the sheet before doing this. | * '''Note''' if something hasn't cut/engraved to the complete depth (or you just want to run it again) it is possible to select which layers are 'output' by scrolling to the right in the layers box, this is very useful for an extra layer of engraving or to confirm a full cut. DON'T move the sheet before doing this. | ||
* Alternately, something like [http://wiki.evilmadscientist.com/StippleGen| StippleGen] can be used to produce a vector based interpretation of an image, that can be used with a low powered cut. This should be produced much faster than an engraving. | |||
==Uploading your data file== | ==Uploading your data file== | ||
