Bureaucrats, checkuser, Administrators
3,313
edits
Equipment/Vending machine: Difference between revisions
From London Hackspace Wiki
no edit summary
(→To do) |
No edit summary |
||
| Line 36: | Line 36: | ||
* Create board to drive motors (24V) | * Create board to drive motors (24V) | ||
** | ** Schematic done. pcb layout proceeding. docs in [https://github.com/artag/vend github], help welcome (artag) | ||
* Soldering for connector | |||
* Replace locks (it's hard to find locks of the right shape - some have been acquired, but need bending) | * Replace locks (it's hard to find locks of the right shape - some have been acquired, but need bending) | ||
**Side lock is 30mm. A new one is ordered. I have the cam I made for the old one. | **Side lock is 30mm. A new one is ordered. I have the cam I made for the old one. | ||
***Lock has arrived, but keying is such that the key can only be removed when the lock is in the open position. The cam is being remade to suit. parts with mentar. | ***Lock has arrived, but keying is such that the key can only be removed when the lock is in the open position. The cam is being remade to suit. parts with mentar. | ||
**What is the state of front locks ? We should still have the cams from the old ones | |||
* Network connectivity | |||
** Need to locate it first, probably outside the kitchen | |||
* Set up first minimal operation | * Set up first minimal operation | ||
