93
edits
Laser Cutter/Instructions: Difference between revisions
From London Hackspace Wiki
→Powering on
m (→Preparing your design: minor typos) |
|||
| Line 3: | Line 3: | ||
Refresher instructions found at [[Equipment/LaserCutter/Refresher]] | Refresher instructions found at [[Equipment/LaserCutter/Refresher]] | ||
==Powering on== | ==Powering on== | ||
# | # Place your card on the reader, insert key and turn - the PC is turned on using the 'e' button on the front of the PC (black PC with DNH "CCTV machine" label). | ||
#* If you turn the key on and nothing happens, check that the Emergency Stop (the big red button) is not locked down. If it is, turn it until is springs up and the machine should power up. | #* If you turn the key on and nothing happens, check that the Emergency Stop (the big red button) is not locked down. If it is, turn it until is springs up and the machine should power up. | ||
# '''Always''' perform the following pre-checks: | # '''Always''' perform the following pre-checks: | ||
