13
edits
mNo edit summary |
(add quick description for UART protocol) |
||
Line 83: | Line 83: | ||
+ * MISO <-> MISO | + * MISO <-> MISO | ||
+ * SCL/CLK <-> SCK | + * SCL/CLK <-> SCK | ||
Information about the schematics to use with any of the supported protocols can be found here [http://dangerousprototypes.com/docs/images/1/1b/Bp-pin-cable-color.png] | |||
=== How to get a shell anything UART === | |||
Follow this step to get a shell using the bus pirate to you UART devices. | |||
1. First find the UART baud rate for the device. You can generally find this information from the constructors manual or using an oscilloscope.Note it on a piece of paper. | |||
2. Find the connecting plug for it. Need some magic here. It mostly trying to find the GND first using tester and trying to find the voltage pin and data pin. | |||
3. Connect you bus pirate to your device. | |||
4. Find the new device using 'ls /dev/tty*' | |||
5. Start a shell. Either trough minicom or screen. | |||
6. m ( for mode) | |||
7. 3 (for selecting the UART) | |||
8. select your baud rate ( most common baud rate are 9600 or 115200) | |||
9. default work in most of the case to get your shell on any devices 8 | |||
10. select stop bits is 1 most of the case | |||
11. enjoy your shell. | |||
== Real life example == | == Real life example == |
edits