434
edits
Project:1-web-interfaces-for-rc-vehicles: Difference between revisions
From London Hackspace Wiki
Project:1-web-interfaces-for-rc-vehicles (view source)
Revision as of 01:14, 20 November 2010
, 20 November 2010→Arduino Shield Pinout
Samthetechie (talk | contribs) (Created page with "Projects ==Aim== Drive a r/c car in as near realtime as possible via a webinterface with a driver's POV wireless video feed. ==Current Implementation Status / Operator's L…") |
Samthetechie (talk | contribs) |
||
| Line 24: | Line 24: | ||
===Arduino Shield Pinout=== | ===Arduino Shield Pinout=== | ||
Currently the makeshift stripboard connector is wired as below: | Currently the makeshift stripboard connector is wired as below: | ||
Cable Colour: | |||
Arduino Pin: Pin11 Pin10 Pin9 Pin8 | Cable Colour: Black Blue White Brown | ||
Arduino Pin: Pin11 Pin10 Pin9 Pin8 | |||
There is also a digital ground pin (it is a black cable and it is on its own) attached to a chocolate block in order to allow sharing of the digital ground with other circuits on that arduino. | There is also a digital ground pin (it is a black cable and it is on its own) attached to a chocolate block in order to allow sharing of the digital ground with other circuits on that arduino. | ||
