Project:1-web-interfaces-for-rc-vehicles: Difference between revisions
From London Hackspace Wiki
434 bytes removed
, 20 November 2010
|
|
Line 27: |
Line 27: |
| ! Result | | ! Result |
| |- | | |- |
| | Result | | | ?board car1 |
| | | | | Drive forward and turn left. |
| |- | | |- |
| | Technology | | | ?board car2 |
| | FFF (Fused Filament Fabrication)/Thermoplastic extrusion | | | Drive forward and turn right. |
| |- | | |- |
| | Price of all materials||[[Mendel materials procurement#Costing|€350]] | | | ?board car3 |
| | | Drive backward and turn left. |
| |- | | |- |
| | Annual Service Cost||Occasional oiling = €5. It can print its own replacement printed parts at material cost. | | | ?board car4 |
| | | Drive backward and turn right. |
| |- | | |- |
| | Size ||500 mm (W) x 400 mm (D) x 360 mm (H) | | | ?board car5 |
| | | Drive forward. |
| |- | | |- |
| | Weight ||7.0 kg. | | | ?board car6 |
| | | Drive backward. |
| |- | | |- |
| | Build Envelope||200 mm (W) x 200 mm (D) x 140 mm (H). | | | ?board car7 |
| | | Turn wheels left (not latching, implemented only for testing). |
| |- | | |- |
| | Materials||[[PLA]], HDPE, [[ABS]] & more. Uses ø 3 mm filament. | | | ?board car8 |
| |-
| | | Turn wheels right (not latching, implemented only for testing). |
| | Material Cost||[[PLA]]: €22/kg, HDPE: €11/kg, [[ABS]]: €17/kg. | |
| |-
| |
| | Speed||15.0 cm<sup>3</sup> per hour solid (test done for [[PLA]], similar for others).
| |
| |-
| |
| | Accuracy||Diameter of nozzle 0.5 mm, 2 mm min. feature size, 0.1 mm positioning accuracy, layer thickness 0.3 mm
| |
| |-
| |
| | Finish
| |
| | Fair
| |
| |-
| |
| | Volume of printed parts to replicate||1110 cm<sup>3</sup>
| |
| |- | | |- |
| |} | | |} |