Project:SteamRollerSkate: Difference between revisions
From London Hackspace Wiki
Bluekieran (talk | contribs) (Created page with "A hybrid steam engine/steamroller/rollerskate built around a victorian style boot. ==Features== * Mill-style steam engine ** Boiler and furnace live inside the boot, with a hin...") |
(No difference)
|
Revision as of 13:29, 16 February 2011
A hybrid steam engine/steamroller/rollerskate built around a victorian style boot.
Features
- Mill-style steam engine
- Boiler and furnace live inside the boot, with a hinged grille on the heel providing access to the furnace.
- Furnace fuelled by hexamine tablet
- Furnace and boiler made of two tin cans brazed together, with rockwool nested between to improve heat transfer.
- Combine water inlet with close-fitted weighted cap as safety valve?
- Moving parts live outside the boot.
- Front wheel will be a single roller, connected by forks to the chassis.
- Ideally would attach the fork to chassis with a skate-style "truck".
- Failing that, allow the forks to turn freely and feed a central spoke through the upper of the boot to a steering wheel.
- Back wheels would be fixed to a central shaft and driven by the mill.
Progress
I've ordered a pair of suitably victorianesque boots from eBay that I think will have enough room for a boiler/furnace based on two small Carnation condensed milk cans.
