Project:SteamRollerSkate

A hybrid steam engine/steamroller/rollerskate built around a victorian style boot.

Features

• Mill-style steam engine
  • Boiler and furnace live inside the boot, with a hinged grille on the heel providing access to the furnace.
  • Furnace fuelled by hexamine tablet
  • Furnace and boiler made of two tin cans brazed together, with rockwool (should this be steel wool?) nested between to improve heat transfer.

• Combine water inlet with close-fitted weighted cap as safety valve?

• Moving parts live outside the boot.

• Front wheel will be a single roller, connected by forks to the chassis.
  • Ideally would attach the fork to chassis with a skate-style "truck".
  • Failing that, allow the forks to turn freely and feed a central spoke through the upper of the boot to a steering wheel.

• Back wheels would be fixed to a central shaft and driven by the mill.

Progress

I've ordered a pair of suitably victorianesque boots from eBay that I think will have enough room for a boiler/furnace based on two small Carnation condensed milk cans.

I've also picked a likely design: http://start-model-engineering.co.uk/category/elmers-32/