Project:Tool Access Control/Solexious Proposal: Difference between revisions
From London Hackspace Wiki
(Created page with "I propose to take on this project, and will document my proposal here.") |
No edit summary |
||
| Line 1: | Line 1: | ||
I | (ACN refers to Access Control Node, a physical node attached to a tool) | ||
==I plan to== | |||
* Base the device on the Duemilanove arduino as it fits our needs and has a wide base of users. | |||
* Use the wiznet chip for ethernet support | |||
* Use i2c sm030 rfid readers | |||
* allow different control outputs (relay, Darlington, servo control etc) | |||
* use flash memory for internal storage | |||
==Services== | |||
===Mission critical=== | |||
These must function without networking or main server available: | |||
* Check if card in ACN local db and allow use if is | |||
* Set tool into "out of order" mode | |||
===Non critical=== | |||
* Add cards | |||
* Report back to central server (usage etc) | |||
Revision as of 01:07, 5 February 2012
(ACN refers to Access Control Node, a physical node attached to a tool)
I plan to
- Base the device on the Duemilanove arduino as it fits our needs and has a wide base of users.
- Use the wiznet chip for ethernet support
- Use i2c sm030 rfid readers
- allow different control outputs (relay, Darlington, servo control etc)
- use flash memory for internal storage
Services
Mission critical
These must function without networking or main server available:
- Check if card in ACN local db and allow use if is
- Set tool into "out of order" mode
Non critical
- Add cards
- Report back to central server (usage etc)
