Project:Sinter: Difference between revisions
From London Hackspace Wiki
(Created page with "Let us build a laser sinter. The plan is to build a selective laser sinter to fuse plastic powder. How it works A laser moves over a 2D area of powder fusing the powder into a...") |
m (Montyphy moved page Sinter to Project:Sinter) |
||
| (5 intermediate revisions by 3 users not shown) | |||
| Line 3: | Line 3: | ||
The plan is to build a selective laser sinter to fuse plastic powder. | The plan is to build a selective laser sinter to fuse plastic powder. | ||
How it works | ==How it works== | ||
A laser moves over a 2D area of powder fusing the powder into a solid. When one layer is finished the bed of powder drops and a new layer of powder is added. The process is repeated until an object is created. | A laser moves over a 2D area of powder fusing the powder into a solid. When one layer is finished the bed of powder drops and a new layer of powder is added. The process is repeated until an object is created. | ||
Parts of the project | ==Next step== | ||
Electronics - A microprocessor that can control stepper motors, trigger the laser & monitor the system for faults. This is probably the hardest part of the project. Status: Finished. | Fire lasers at powders. | ||
Laser - Need to know wattage and frequency needed by the powder. | |||
==Parts of the project== | |||
Overhead gantry - used to move the laser or laser-beam in X,Y space. | * Electronics - A microprocessor that can control stepper motors, trigger the laser & monitor the system for faults. This is probably the hardest part of the project. Status: Finished. | ||
Powder hopper - a powder holder. | * Laser - Need to know wattage and frequency needed by the powder. | ||
Build area - a hole under the laser that drops down smoothly and evenly a distance as small as 50 nanometers to make space for the next layer of powder. | * Powder - Consider using black PLA plastic as it smells nice when heated. | ||
* Overhead gantry - used to move the laser or laser-beam in X,Y space. | |||
Case - A container to stop the Hackspace filling with fine powder. Maybe with glove holes and compressed air so the printed parts can be cleaned without opening. | * Powder hopper - a powder holder. | ||
Heater - Optional heater to bring the powder close to fusing temperature so the laser can move faster. | * Build area - a hole under the laser that drops down smoothly and evenly a distance as small as 50 nanometers to make space for the next layer of powder. | ||
* Powder mover - Something to move the powder from the hopper to the build area. needs to pack powder down to a uniform hight without disturbing the layer below. | |||
* Case - A container to stop the Hackspace filling with fine powder. Maybe with glove holes and compressed air so the printed parts can be cleaned without opening. | |||
* Heater - Optional heater to bring the powder close to fusing temperature so the laser can move faster. | |||
[[Category:Projects]] | |||
Latest revision as of 15:29, 3 June 2013
Let us build a laser sinter.
The plan is to build a selective laser sinter to fuse plastic powder.
How it works
A laser moves over a 2D area of powder fusing the powder into a solid. When one layer is finished the bed of powder drops and a new layer of powder is added. The process is repeated until an object is created.
Next step
Fire lasers at powders.
Parts of the project
- Electronics - A microprocessor that can control stepper motors, trigger the laser & monitor the system for faults. This is probably the hardest part of the project. Status: Finished.
- Laser - Need to know wattage and frequency needed by the powder.
- Powder - Consider using black PLA plastic as it smells nice when heated.
- Overhead gantry - used to move the laser or laser-beam in X,Y space.
- Powder hopper - a powder holder.
- Build area - a hole under the laser that drops down smoothly and evenly a distance as small as 50 nanometers to make space for the next layer of powder.
- Powder mover - Something to move the powder from the hopper to the build area. needs to pack powder down to a uniform hight without disturbing the layer below.
- Case - A container to stop the Hackspace filling with fine powder. Maybe with glove holes and compressed air so the printed parts can be cleaned without opening.
- Heater - Optional heater to bring the powder close to fusing temperature so the laser can move faster.
