Amateur Radio/Repeaters: Difference between revisions

From London Hackspace Wiki
Line 39: Line 39:


;[http://www.ukrepeater.net/my_repeater.php?id=777 GB3EL]
;[http://www.ukrepeater.net/my_repeater.php?id=777 GB3EL]
:Location: London
:TX: 145.600 MHz
:TX: 145.600 MHz
:RX: 145.000 MHz (offset 0.6 MHz)
:RX: 145.000 MHz (offset 0.6 MHz)
:CTCSS: 82.5kHz
:CTCSS: 82.5kHz
[[Category:Amateur Radio]]
[[Category:Amateur Radio]]

Revision as of 04:40, 16 April 2015

Repeaters that Hackspace members can get to (even if it's RX only). Further UK repeaters can be found at www.ukrepeater.net.

The TX quoted here is the TX of the repeater, so if you want to listen to it, set your radio to the first value.

Please note that while some Radios start with the TX value and program the offset , other radios start with RX value. In those cases Offset direction would have to be changed.

70cm

GB3HR
Location: Harrow
TX: 433.3500 MHz
RX: 434.9500 MHz (offset +1.6 MHz)
CTCSS: 82.5Hz
GB3LW
Location: London Southbank
TX: 430.9000 MHz
RX: 438.5000 MHz (offset +7.6 MHz)
CTCSS: 82.5Hz
GB3NS
Location: Caterham
TX: 439.6750 MHz
RX: 430.6750 MHz (offset -9 MHz)
CTCSS: 82.5Hz
GB3OK
Location: Bromley, Kent
TX: 439.512 MHz
RX: 430.5125 MHz (offset -8.9995 MHz)
CTCSS: 82.5 Hz
GB3OY
Location: Buckhurst Hill, Essex
TX: 430.950 MHz
RX: 438.550 MHz (offset +7.6 MHz)
CTCSS: 82.5 Hz

2m

GB3EL
Location: London
TX: 145.600 MHz
RX: 145.000 MHz (offset 0.6 MHz)
CTCSS: 82.5kHz