93
edits
Laser Cutter/Instructions: Difference between revisions
From London Hackspace Wiki
m
Added description of PC as there are two there next to each other and it wasn't obvious (to me).
m (→Logging use: actually nobody gives a shit any more) |
m (Added description of PC as there are two there next to each other and it wasn't obvious (to me).) |
||
| Line 3: | Line 3: | ||
Refresher instructions found at [[Equipment/LaserCutter/Refresher]] | Refresher instructions found at [[Equipment/LaserCutter/Refresher]] | ||
==Powering on== | ==Powering on== | ||
# Insert key and turn - the PC is turned on using the 'e' button on the front of the PC. | # Insert key and turn - the PC is turned on using the 'e' button on the front of the PC (black PC with DNH "CCTV machine" label). | ||
#* If you turn the key on and nothing happens, check that the Emergency Stop (the big red button) is not locked down. If it is, turn it until is springs up and the machine should power up. | #* If you turn the key on and nothing happens, check that the Emergency Stop (the big red button) is not locked down. If it is, turn it until is springs up and the machine should power up. | ||
# '''Always''' perform the following pre-checks: | # '''Always''' perform the following pre-checks: | ||
