Equipment/HPC LS3060 Laser Cutter/LogBook: Difference between revisions
From London Hackspace Wiki
Equipment/HPC LS3060 Laser Cutter/LogBook (view source)
Revision as of 23:54, 19 September 2010
, 19 September 2010→Logbook
| Line 1: | Line 1: | ||
==Logbook== | ==Logbook== | ||
===29/09/2010 Operator [[User:Solexious|Solexious]]=== | |||
* After a failed attempt due to a slipping belt (probably the cause of the issues on the 18th), a [http://www.thingiverse.com/derivative:3824 money box] was cut and assembled using the [http://www.thingiverse.com/thing:404 Box-o-Tron] as a base for the dxf file. | |||
* There is also a slight issue with focus of the laser, on 4mm acrylic settings of Speed 4 Power 100, at the side of the bed to the left it cuts perfectly, past 1/2 way to the right of the bed it fails to penetrate fully. A setting of Speed 5 Power 100 gives undesired blemishes from contact with the honey comb. | |||
===18/09/2010 Operator [[User:Meurig|Meurig]]=== | ===18/09/2010 Operator [[User:Meurig|Meurig]]=== | ||
* George cut some 2mm acrylic to make an enclosure for a robot. | * George cut some 2mm acrylic to make an enclosure for a robot. | ||
