Risk Assessment/ Laser Cutting

Risk Assessment - Laser Cutter

This risk assessment is intended to provide guidance on the risk associated with the above equipment and activities in normal use. Please also check general risk assessments for the space as a whole. Any discrepancies, errors or concerns should be raised with the document maintainers or trustees - do not edit this assessment directly. For responsible persons and last update, see 'version log' of the assessment page.

Activity

Laser cutting of wood or plastic materials

Signage

• 
• 

Understanding Risk Rating

LOW - Ensure current control measures are in place and continue with activity

MED - Control measures may be adequate, co-supervision is recommended

HIGH - Do not undertake activity without further consultation with area specialists

Risk Assessment

Identify Hazards	Who May be Harmed and How	Severity	Control Measures	Likelihood	Risk Rating
Potential Fire Risk	All users	HIGH	All members must receive the induction from a designated laser trainer in order to understand how to use the machine safely. Training is provided to demonstrate which materials are safe to cut on the laser.  The Laser Cutter Manual is accessible to provide a list of which materials are safe to cut on the laser.  Signage is provided for the correct settings to use on the laser in order to minimise fire risk.  The laser log is provided for the correct settings to use on the laser in order to minimise fire risk.   The laser is never left unattended whilst in use.  Fire extinguisher and fire blanket are located next to the laser.  The laser is regularly cleaned and maintained by the laser team.   Members are encouraged to seek advice from the laser trainers for anything they are unsure about.	MED	HIGH
Creation and inhalation of harmful fumes/gases	Users in workshop	HIGH	Extractor is fitted to laser cutter. The laser induction includes demonstration of using the extractor every time the laser cutter is used.   There is signage to remind users to switch on the extractor. The extraction system including all ducting is checked annually	LOW	MED
User misuse or damage	All users	HIGH	All members must receive the laser induction from a designated laser superuser in order to understand how to use the machine safely. A checklist is provided on the laser that users must follow with every use.  There is clear signage to show that this machine should not be used by untrained members.   There is clear signage to show what should and should not be cut with the laser and the consequences of misuse. There is clear signage that the laser cutter should not be hacked by any member.  Any incidents of possible failure to follow correct procedure are dealt with promptly and effectively by trustees.	LOW	MED