Project:Prusa: Difference between revisions
From London Hackspace Wiki
(Created page with "=Hackspace Prusa= Donated to the space by Billy, to be completed / repaired as a group effort. [https://groups.google.com/group/london-hack-space/msg/a44ff9dffe8e0f0e Mailing l...") |
|||
| Line 11: | Line 11: | ||
===Print remaining parts=== | ===Print remaining parts=== | ||
Listed at [[Prusa/Parts_List]] | |||
===Make heated bed=== | ===Make heated bed=== | ||
Revision as of 08:56, 12 July 2012
Hackspace Prusa
Donated to the space by Billy, to be completed / repaired as a group effort.
Jobs
Find/buy stepper motors
Print remaining parts
Listed at Prusa/Parts_List
Make heated bed
Repair Sanguinololu board
- I've got the boards (a sanguinololu v1.2 with 4 drivers and one opto limit switch).
- Heard from Hipster that the problem was with the temperature measurement. It looks as though the ADC inputs are damaged (the design offers no protection, the microcontroller inputs are directly exposed to external connections) as they're being forced to 2.5V by the micro. Replacement micro ordered. A workaround is possible (use spare ADC inputs) but the micro is cheap.--Artag 06:49, 8 July 2012 (UTC)
