Difference between revisions of "Hackspace Move/Renovation"
Jump to navigation
Jump to search
| Line 19: | Line 19: | ||
==Car Park== | ==Car Park== | ||
* Member access for car parking and bike storage | * Member access for car parking and bike storage | ||
| + | * Car or motorbike working | ||
| + | * Paint spraying | ||
==Facilities== | ==Facilities== | ||
| + | |||
| + | ===Desk space=== | ||
| + | |||
| + | *General areas should have good light | ||
| + | *Laptop areas can be less roomy but not suffer glare | ||
| + | |||
| + | ===Quiet areas=== | ||
| + | |||
| + | *Dual-use with workshops / meeting rooms | ||
| + | *More than one needed to avoid conflicts but provide flexibility | ||
| + | *Music | ||
| + | *Film | ||
| + | |||
| + | ===Arts=== | ||
| + | |||
| + | *Large flat area (might be part of adjacent construction area) | ||
| + | *Sink | ||
| + | *Drying | ||
| + | *Spray paint not allowed | ||
| + | *Might include etch station | ||
| + | *Might include non-oily machinery such as laser cutter, 3d printing | ||
| + | |||
| + | ===Electronics=== | ||
| + | |||
| + | *Mostly for precision equipment and testgear - clean, tidy. | ||
| + | *Must have adequate parts storage | ||
| + | *Can include small soldering area (but soldering can often be done on desk space) | ||
| + | *Probably colocated with desks as activities are similar | ||
| + | *Might include non-oily machinery such as laser cutter, 3d printing | ||
| + | |||
| + | ===Construction=== | ||
| + | |||
| + | *General workshop. | ||
| + | *May include popular tools such as pillar drill, rage saw. | ||
| + | *Some overlap with arts, oily area, wood. | ||
| + | |||
| + | ===Woodwork=== | ||
| + | |||
| + | *Kept separate from oily area | ||
| + | *Dust extraction on individual tools | ||
| + | *Possible overlap with several areas | ||
| + | *Cannot overlap such that dust is a problem to other areas | ||
| + | *Cannot overlap such that serfaces are contaminated with oil | ||
| + | |||
| + | ===Oily=== | ||
| + | |||
| + | *Light metalwork, machine tools | ||
| + | *Bike workshop | ||
| + | *Lathes, Mills | ||
| + | *Needs easy access to outside for incoming bikes | ||
| + | *No grinding allowed | ||
| + | |||
| + | ===Dirty=== | ||
| + | |||
| + | *Welding | ||
| + | *Grinding | ||
| + | |||
==Total Costing== | ==Total Costing== | ||
The above will cost approximately - £xxx | The above will cost approximately - £xxx | ||
Revision as of 09:23, 9 January 2013
This page is for planning the build out of our new space, currently centred on 445 Hackney Road.
Please note, this is for planning on bringing up a new space to the level we currently enjoy, not wild new awesome things. (that can come after) This is so that we have a action and cost plan to maintain the level of our current space.
Basement
- Extraction for individual tools and room dust.
- Power distribution to the center of the room etc
- Moar network sockets around room (ACnode)
- Look at flooring situation
Ground Floor
- Moar network
- Mid room power
- Kitchen build out
- Electric release on the rear door
- Building of classroom
- Draft proof louver windows
Car Park
- Member access for car parking and bike storage
- Car or motorbike working
- Paint spraying
Facilities
Desk space
- General areas should have good light
- Laptop areas can be less roomy but not suffer glare
Quiet areas
- Dual-use with workshops / meeting rooms
- More than one needed to avoid conflicts but provide flexibility
- Music
- Film
Arts
- Large flat area (might be part of adjacent construction area)
- Sink
- Drying
- Spray paint not allowed
- Might include etch station
- Might include non-oily machinery such as laser cutter, 3d printing
Electronics
- Mostly for precision equipment and testgear - clean, tidy.
- Must have adequate parts storage
- Can include small soldering area (but soldering can often be done on desk space)
- Probably colocated with desks as activities are similar
- Might include non-oily machinery such as laser cutter, 3d printing
Construction
- General workshop.
- May include popular tools such as pillar drill, rage saw.
- Some overlap with arts, oily area, wood.
Woodwork
- Kept separate from oily area
- Dust extraction on individual tools
- Possible overlap with several areas
- Cannot overlap such that dust is a problem to other areas
- Cannot overlap such that serfaces are contaminated with oil
Oily
- Light metalwork, machine tools
- Bike workshop
- Lathes, Mills
- Needs easy access to outside for incoming bikes
- No grinding allowed
Dirty
- Welding
- Grinding
Total Costing
The above will cost approximately - £xxx