Difference between revisions of "Project:Clark Trailer Mast"
Jump to navigation
Jump to search
(Update formatting, orderise work required list,) |
|||
Line 10: | Line 10: | ||
[http://flic.kr/p/c31ucs Pictures here] | [http://flic.kr/p/c31ucs Pictures here] | ||
− | == | + | == Specifications! == |
− | + | {| class="wikitable" | |
− | + | !colspan="2"|Trailer/Mast Specifications | |
− | + | |- | |
− | + | |Extended Height | |
− | + | |30m (100') | |
− | + | |- | |
− | + | |Antenna Attachment | |
− | + | |Standard Socket 24mm diameter | |
− | + | (Currently has a pole lodged in it) | |
− | + | |- | |
− | + | |Trailer Length | |
− | + | |5.9m | |
− | + | |- | |
− | + | |Trailer Width | |
− | + | |1.9m | |
− | + | |- | |
− | + | |Trailer Height (with mast stowed) | |
− | + | |1.8m | |
− | + | |- | |
− | + | |Trailer Wheel Size | |
− | + | |185/80R15 Tyres + innertubes | |
− | + | |- | |
− | + | |Maximum Recommended Headload | |
− | + | |11.4kgs (Over 20m extension) | |
− | + | 27 kgs (Under 20m extension) | |
− | + | |- | |
+ | |Maximum Safe Windspeed | ||
+ | |16 km/h (Unguyed) | ||
+ | 96 km/h (Guyed with middle and top guys) | ||
+ | |- | ||
+ | |Picket Radius | ||
+ | |18m | ||
+ | |- | ||
+ | |Nett Weight (Mast + Trailer) | ||
+ | |1,088 kgs | ||
+ | |- | ||
+ | |Time to Extend | ||
+ | |10 mins | ||
+ | |- | ||
+ | |Time to Retract | ||
+ | |6 mins | ||
+ | |- | ||
+ | !colspan="2"|Engine Specifications | ||
+ | |- | ||
+ | |Compressor Make | ||
+ | |Clark No. 2 Single Cylinder 3" Bore x 44mm Stroke | ||
+ | |- | ||
+ | |Engine Make | ||
+ | |2hp Briggs & Stratton 4 Stroke Single Cylinder | ||
+ | |} | ||
− | == | + | == Work Required == |
+ | (This is in some sort of vague order) | ||
− | + | * Strip existing paint and rust | |
− | |||
− | |||
− | |||
− | + | * Rustproofing | |
− | * | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | * Replace all seals and serviceable components | |
+ | ** £165 + vat + delivery for a complete set of seals, O-rings, and grease. Need to provide measurements to Clark. | ||
− | * | + | * Painting with a suitable exterior grade paint |
− | + | * http://www.hammerite.co.uk/products/direct_to_rust_metal_paint_smooth_finish.jsp - Hackspace blue! | |
− | + | ** The original colour was Caterpillar Yellow BS G88/0668. Might be nice to get it in original condition. | |
− | ** The | ||
− | + | * Welding/fabricating replacement parts where required, i.e. wheelarches, reflector arms | |
− | * | + | * Service engine, pullcord needs replacing |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | == Future projects == | |
+ | * Replace raising crank with electric motor? | ||
+ | * Electric start compressor engine? | ||
+ | * Replace petrol engine with electric motor? |
Revision as of 10:17, 13 July 2013
30m Clark trailer mast.
Specs
- Make
- Clark
- Model
- 63/100
Specifications!
Trailer/Mast Specifications | |
---|---|
Extended Height | 30m (100') |
Antenna Attachment | Standard Socket 24mm diameter
(Currently has a pole lodged in it) |
Trailer Length | 5.9m |
Trailer Width | 1.9m |
Trailer Height (with mast stowed) | 1.8m |
Trailer Wheel Size | 185/80R15 Tyres + innertubes |
Maximum Recommended Headload | 11.4kgs (Over 20m extension)
27 kgs (Under 20m extension) |
Maximum Safe Windspeed | 16 km/h (Unguyed)
96 km/h (Guyed with middle and top guys) |
Picket Radius | 18m |
Nett Weight (Mast + Trailer) | 1,088 kgs |
Time to Extend | 10 mins |
Time to Retract | 6 mins |
Engine Specifications | |
Compressor Make | Clark No. 2 Single Cylinder 3" Bore x 44mm Stroke |
Engine Make | 2hp Briggs & Stratton 4 Stroke Single Cylinder |
Work Required
(This is in some sort of vague order)
- Strip existing paint and rust
- Rustproofing
- Replace all seals and serviceable components
- £165 + vat + delivery for a complete set of seals, O-rings, and grease. Need to provide measurements to Clark.
- Painting with a suitable exterior grade paint
- http://www.hammerite.co.uk/products/direct_to_rust_metal_paint_smooth_finish.jsp - Hackspace blue!
- The original colour was Caterpillar Yellow BS G88/0668. Might be nice to get it in original condition.
- Welding/fabricating replacement parts where required, i.e. wheelarches, reflector arms
- Service engine, pullcord needs replacing
Future projects
- Replace raising crank with electric motor?
- Electric start compressor engine?
- Replace petrol engine with electric motor?