Laser Cutter/Metal: Difference between revisions
m (CDave moved page Etching my Macbook Air to London Hackspace Wiki:Laser Cutter/Metal: Making this page more general) |
m (CDave moved page London Hackspace Wiki:Laser Cutter/Metal to Laser Cutter/Metal) |
Revision as of 12:00, 12 March 2014
2013-08-07
Simon engraved the back of his macbook air using the Engraving setting.
Speed was 200, Power was 80.
The effect looks good in bright light (when it looks black) The 'whiteness' of the etching is inconsistent, looking dirty/smokey in areas where it was denser. I'm guessing maybe some of the smoke? got annodized into the metal? Anyway it was on the back and just a test.
A couple of pictures are up at [1]
Planning on what to do to the front. [2]
2014-03-08
Patrick engraved the front of a MacBook-pro
Speed was sloooow, power was 100, and the design was barely visible after over an hour of lasing time.
Maybe the anodised aluminium has changed in recent years?
Laser Bonding
An alternative to removing a layer of anodised material, is the bond a layer of new material onto the metal, e.g. Cermark, or cheap moly lube.
