Project:HM55B: Difference between revisions
From London Hackspace Wiki
mNo edit summary |
|||
| Line 70: | Line 70: | ||
READ BIT: 0 | READ BIT: 0 | ||
Note that you need &&, because &:50000 doesn't seem to work, but the BusPirate parser obviously creates enough of a delay. | Note that you need to delay with &&, because &:50000 doesn't seem to work, but the BusPirate parser obviously creates enough of a delay. This means that we don't know how fast it can be clocked, because each ! will be > 50ms apart. | ||
Sample values: | Sample values: | ||
Revision as of 23:58, 2 September 2010
Module
$20-25 compass module for embedded systems. SMD will be cheaper.
Testing with the BusPirate
BusPirate settings:
- M (mode)
- 8 (3-wire raw)
- 4 (400KHz)
- 2 (3.3V high)
- W (turn on 5V output)
Reset:
\[/_\/_\/_\/_\&:10]
RAW3WIRE>\[/_\/_\/_\/_\&:10] CLOCK, 0 CS ENABLED CLOCK, 1 DATA OUTPUT, 0 CLOCK, 0 CLOCK, 1 DATA OUTPUT, 0 CLOCK, 0 CLOCK, 1 DATA OUTPUT, 0 CLOCK, 0 CLOCK, 1 DATA OUTPUT, 0 CLOCK, 0 DELAY 0b00001010uS CS DISABLED
Take sample (1100 is the response for success, 00xx is for incomplete, xx11 is error, see p9 of datasheet)
\[/-\/_\/_\/_\&&]&:10[&:10/-\/-\/_\/_\!!!!&!!!!!!!!!!!&!!!!!!!!!!!]
READ BIT: 1 READ BIT: 1 READ BIT: 0 READ BIT: 0 DELAY 0b00000001uS READ BIT: 0 READ BIT: 0 READ BIT: 0 READ BIT: 0 READ BIT: 0 READ BIT: 0 READ BIT: 1 READ BIT: 0 READ BIT: 0 READ BIT: 0 READ BIT: 0 DELAY 0b00000001uS READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 0 READ BIT: 0
Note that you need to delay with &&, because &:50000 doesn't seem to work, but the BusPirate parser obviously creates enough of a delay. This means that we don't know how fast it can be clocked, because each ! will be > 50ms apart.
Sample values:
0,-6
-1,-11
-1,-19
