Difference between revisions of "Entry level CAD/CAM"
Jump to navigation
Jump to search
Deanforbes (talk | contribs) |
|||
Line 1: | Line 1: | ||
+ | The shapeoko is the entry level machine, it is up to you to do your own research and learn what you need to run it | ||
− | + | You will need to have produced a drawing CAD and machine code CAM there are numerous resources online | |
− | + | To start you probably want to buy some cheap bits on ebay | |
− | + | It is not access controlled, if you come down on a Thursday some one will show you where the on switches are for the machine and computer | |
− | + | It is more often than not used for PCB Drilling and 2.5 D milling | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− |
Revision as of 09:05, 25 June 2017
The shapeoko is the entry level machine, it is up to you to do your own research and learn what you need to run it
You will need to have produced a drawing CAD and machine code CAM there are numerous resources online
To start you probably want to buy some cheap bits on ebay
It is not access controlled, if you come down on a Thursday some one will show you where the on switches are for the machine and computer
It is more often than not used for PCB Drilling and 2.5 D milling