Cabinet Wiring: Difference between revisions
From London Hackspace Wiki
No edit summary |
No edit summary |
||
| Line 135: | Line 135: | ||
|- | |- | ||
| Example || Example || Example || Example | | Example || Example || Example || Example | ||
|} | |||
Spindle drive (Baldor VS1ST) | |||
{| class="wikitable" | |||
|+ VFD pin assignment | |||
|- | |||
! Connector !! pin !! destination !! description | |||
|- | |||
| 1 || 1 || Power board || +24V out | |||
|- | |||
| || 2 || Power board || D IN 1 - connect to to pin 1 to enable drive | |||
|- | |||
| || 6 || Control board || An IN 1 - speed control voltage | |||
|- | |||
| || 7 || Control board || 0V | |||
|- | |||
| || 10 || estop chain || Relay contacts n/o | |||
|- | |||
| || 11 || estop chain || Relay contacts n/o | |||
|} | |} | ||
Revision as of 11:27, 14 March 2022
Original (Baldor) interface wiring
No obvious connector numbering on the board, so these are numbered clockwise starting from the bottom right hand corner (power) with pins numbered consecutively in the same direction - ie pin 1 to pin n run clockwise.
| Connector | pin | destination | description |
|---|---|---|---|
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
Connector and pin numbering taken from File:Schematic Design MRP-0850B.pdf
| Connector | pin | destination | description |
|---|---|---|---|
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
| Example | Example | Example | Example |
Spindle drive (Baldor VS1ST)
| Connector | pin | destination | description |
|---|---|---|---|
| 1 | 1 | Power board | +24V out |
| 2 | Power board | D IN 1 - connect to to pin 1 to enable drive | |
| 6 | Control board | An IN 1 - speed control voltage | |
| 7 | Control board | 0V | |
| 10 | estop chain | Relay contacts n/o | |
| 11 | estop chain | Relay contacts n/o |
