Project talk:Deactivating a ferric chloride solution: Difference between revisions

From London Hackspace Wiki
No edit summary
No edit summary
Line 1: Line 1:
Ferric Chloride is convenient for small projects, but it is used up and disposal is a pain. An alternative is an etchant that can be regenerated by adding HCl and bubbling air through it.
Ferric Chloride is convenient for small projects, but it is used up and disposal is a pain. An alternative is an etchant that can be regenerated by adding HCl and bubbling air through it.


*[http://www.xertech.net/Tech/CuCl_ech.html CuCl etch]
*[http://www.xertech.net/Tech/CuCl_ech.html CuCl etching]
*[http://members.optusnet.com.au/eseychell/PCB/etching_CuCl/index.html#sg_control etching CuCl]
*[http://members.optusnet.com.au/eseychell/PCB/etching_CuCl/index.html Etching with Air Regenerated Acid Cupric Chloride]
*[http://tech.groups.yahoo.com/group/Homebrew_PCBs/ Yahoo - Homebrew PCBs]
*[http://tech.groups.yahoo.com/group/Homebrew_PCBs/ Yahoo - Homebrew PCBs]


I understand from some sources that adding HCl to Ferric Chloride will also regenerate it and eventually the etchant changes to CuCl as above. I don't know how carefully that procedure needs to be managed, or whether it's better to start directly with the CuCl bath.
I understand from some sources that adding HCl to Ferric Chloride will also regenerate it and eventually the etchant changes to CuCl as above. I don't know how carefully that procedure needs to be managed, or whether it's better to start directly with the CuCl bath.

Revision as of 20:16, 26 May 2010

Ferric Chloride is convenient for small projects, but it is used up and disposal is a pain. An alternative is an etchant that can be regenerated by adding HCl and bubbling air through it.

I understand from some sources that adding HCl to Ferric Chloride will also regenerate it and eventually the etchant changes to CuCl as above. I don't know how carefully that procedure needs to be managed, or whether it's better to start directly with the CuCl bath.