Project:Notification Board: Difference between revisions
From London Hackspace Wiki
(→Phases) |
(→Phases) |
||
| Line 6: | Line 6: | ||
==Phases== | ==Phases== | ||
:*Phase 1: <strike>Allow messages to be displayed on the LED board from IRC</strike> | :*Phase 1: <strike>Allow messages to be displayed on the LED board from IRC.</strike> | ||
:*Phase 2: Add sounds when the message changes | :*Phase 2: <strike>Add sounds when the message changes.</strike> | ||
:*Phase 3: Add strobe beacons | :*Phase 3: Add strobe beacons. | ||
:*Phase 4: Daemon the arduino and allow connection via MQTT, add idle messages | :*Phase 4: Daemon the arduino and allow connection via MQTT, add idle messages. | ||
:*Phase 5: Add temperature, light level and PIR sensors | :*Phase 5: Add temperature, light level and PIR sensors. | ||
:*Phase 6: Add i-wire, inc i-buttons | :*Phase 6: Add i-wire, inc i-buttons. | ||
==Code== | ==Code== | ||
Revision as of 22:00, 26 May 2010
Project maintained by Solexious, contact via IRC or charlesyarnold@gmail.com
Summary
This is the board that will hang in the space.
It will send visual and audible notifications to the space, and also publish notifications to the network, temperature, movement etc
Phases
- Phase 1:
Allow messages to be displayed on the LED board from IRC. - Phase 2:
Add sounds when the message changes. - Phase 3: Add strobe beacons.
- Phase 4: Daemon the arduino and allow connection via MQTT, add idle messages.
- Phase 5: Add temperature, light level and PIR sensors.
- Phase 6: Add i-wire, inc i-buttons.
- Phase 1:
Code
- IRC Script: [3]
