Difference between revisions of "Project:Nanode Case"
Jump to navigation
Jump to search
(Created page with "== Nanode Case == 2mm acrylic case cut on the LHS laser cutter. Designed to be small, light and able to have a removable lid. Equipment: * Superglue (to bond sides to base) *...") |
m |
||
| Line 7: | Line 7: | ||
* Superglue (to bond sides to base) | * Superglue (to bond sides to base) | ||
* 5 x 12mm M3 screws (3 to attach nanode to base plate, 2 for lid) | * 5 x 12mm M3 screws (3 to attach nanode to base plate, 2 for lid) | ||
| − | * 8 x M3 nut (2 for lid, | + | * 8 x M3 nut (2 for lid, 6 for base) |
* A4 sheet of 2mm acrylic | * A4 sheet of 2mm acrylic | ||
* 4 x 6mm rubber foot pads | * 4 x 6mm rubber foot pads | ||
Revision as of 22:34, 28 June 2011
Nanode Case
2mm acrylic case cut on the LHS laser cutter. Designed to be small, light and able to have a removable lid.
Equipment:
- Superglue (to bond sides to base)
- 5 x 12mm M3 screws (3 to attach nanode to base plate, 2 for lid)
- 8 x M3 nut (2 for lid, 6 for base)
- A4 sheet of 2mm acrylic
- 4 x 6mm rubber foot pads
(DXF to follow shortly after a couple tweaks)
