Equipment/Scrollsaw: Difference between revisions
From London Hackspace Wiki
(Created page with "==Status== Scrollsaw currently not working due to a broken blade. Blade needs to be removed and length measured so that a replacement can be bought. Possible blades identified be...") |
No edit summary |
||
| Line 18: | Line 18: | ||
# Disconnect the saw from the mains. | # Disconnect the saw from the mains. | ||
# Wear gloves and eye protection at all times - this includes anyone helping or watching. | # Wear gloves and eye protection at all times - this includes anyone helping or watching. | ||
# <need more info> | |||
# need more info | |||
# Using some tape, make a note on the machine of the current blade TPI. | # Using some tape, make a note on the machine of the current blade TPI. | ||
# From a safe position, reconnect the power and activate the saw to verify that it is running correctly. | # From a safe position, reconnect the power and activate the saw to verify that it is running correctly. | ||
Revision as of 20:40, 22 August 2011
Status
Scrollsaw currently not working due to a broken blade. Blade needs to be removed and length measured so that a replacement can be bought. Possible blades identified below
Model
unknown
Instructions
Mind your fingers!
Cutting
If in doubt then please ask Please only cut thin/small peices of wood or similar soft materials.
Changing the blade
Always observe the safety precautions described below.
Tools required: 5mm allen key, gloves, safety glasses
- Disconnect the saw from the mains.
- Wear gloves and eye protection at all times - this includes anyone helping or watching.
- <need more info>
- Using some tape, make a note on the machine of the current blade TPI.
- From a safe position, reconnect the power and activate the saw to verify that it is running correctly.
Tips
Consumables
- Purchasing:
