Project:Clark Trailer Mast: Difference between revisions
From London Hackspace Wiki
(Update formatting, orderise work required list,) |
|||
| Line 10: | Line 10: | ||
[http://flic.kr/p/c31ucs Pictures here] | [http://flic.kr/p/c31ucs Pictures here] | ||
== | == Specifications! == | ||
{| class="wikitable" | |||
!colspan="2"|Trailer/Mast Specifications | |||
|- | |||
|Extended Height | |||
|30m (100') | |||
|- | |||
|Antenna Attachment | |||
|Standard Socket 24mm diameter | |||
(Currently has a pole lodged in it) | |||
|- | |||
|Trailer Length | |||
|5.9m | |||
|- | |||
|Trailer Width | |||
|1.9m | |||
|- | |||
|Trailer Height (with mast stowed) | |||
|1.8m | |||
|- | |||
|Trailer Wheel Size | |||
|185/80R15 Tyres + innertubes | |||
|- | |||
|Maximum Recommended Headload | |||
|11.4kgs (Over 20m extension) | |||
27 kgs (Under 20m extension) | |||
|- | |||
|Maximum Safe Windspeed | |||
|16 km/h (Unguyed) | |||
96 km/h (Guyed with middle and top guys) | |||
|- | |||
|Picket Radius | |||
|18m | |||
|- | |||
|Nett Weight (Mast + Trailer) | |||
|1,088 kgs | |||
|- | |||
|Time to Extend | |||
|10 mins | |||
|- | |||
|Time to Retract | |||
|6 mins | |||
|- | |||
!colspan="2"|Engine Specifications | |||
|- | |||
|Compressor Make | |||
|Clark No. 2 Single Cylinder 3" Bore x 44mm Stroke | |||
|- | |||
|Engine Make | |||
|2hp Briggs & Stratton 4 Stroke Single Cylinder | |||
|} | |||
== | == Work Required == | ||
(This is in some sort of vague order) | |||
* Strip existing paint and rust | |||
* Rustproofing | |||
* | |||
* Replace all seals and serviceable components | |||
** £165 + vat + delivery for a complete set of seals, O-rings, and grease. Need to provide measurements to Clark. | |||
* | * Painting with a suitable exterior grade paint | ||
* http://www.hammerite.co.uk/products/direct_to_rust_metal_paint_smooth_finish.jsp - Hackspace blue! | |||
** The original colour was Caterpillar Yellow BS G88/0668. Might be nice to get it in original condition. | |||
** The | |||
* Welding/fabricating replacement parts where required, i.e. wheelarches, reflector arms | |||
* | * Service engine, pullcord needs replacing | ||
== Future projects == | |||
* Replace raising crank with electric motor? | |||
* Electric start compressor engine? | |||
* Replace petrol engine with electric motor? | |||
Revision as of 10:17, 13 July 2013
30m Clark trailer mast.
Specs
- Make
- Clark
- Model
- 63/100
Specifications!
| Trailer/Mast Specifications | |
|---|---|
| Extended Height | 30m (100') |
| Antenna Attachment | Standard Socket 24mm diameter
(Currently has a pole lodged in it) |
| Trailer Length | 5.9m |
| Trailer Width | 1.9m |
| Trailer Height (with mast stowed) | 1.8m |
| Trailer Wheel Size | 185/80R15 Tyres + innertubes |
| Maximum Recommended Headload | 11.4kgs (Over 20m extension)
27 kgs (Under 20m extension) |
| Maximum Safe Windspeed | 16 km/h (Unguyed)
96 km/h (Guyed with middle and top guys) |
| Picket Radius | 18m |
| Nett Weight (Mast + Trailer) | 1,088 kgs |
| Time to Extend | 10 mins |
| Time to Retract | 6 mins |
| Engine Specifications | |
| Compressor Make | Clark No. 2 Single Cylinder 3" Bore x 44mm Stroke |
| Engine Make | 2hp Briggs & Stratton 4 Stroke Single Cylinder |
Work Required
(This is in some sort of vague order)
- Strip existing paint and rust
- Rustproofing
- Replace all seals and serviceable components
- £165 + vat + delivery for a complete set of seals, O-rings, and grease. Need to provide measurements to Clark.
- Painting with a suitable exterior grade paint
- http://www.hammerite.co.uk/products/direct_to_rust_metal_paint_smooth_finish.jsp - Hackspace blue!
- The original colour was Caterpillar Yellow BS G88/0668. Might be nice to get it in original condition.
- Welding/fabricating replacement parts where required, i.e. wheelarches, reflector arms
- Service engine, pullcord needs replacing
Future projects
- Replace raising crank with electric motor?
- Electric start compressor engine?
- Replace petrol engine with electric motor?
