Silvertail A0 Laser Cutter/Cutting Parameters: Difference between revisions
From London Hackspace Wiki
YetiFiasco (talk | contribs) (Created page with "'''Acrylic (Perspex)''' {| class="wikitable" ! style="text-align:left;" | Thickness (mm) ! Speed (mm/sec) ! Power (%) ! Corner Power (%) |- |2 |50 |100 |80 |- |3 |35 |100 |80...") |
YetiFiasco (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
If you experiment with different materials or speeds, please note down all successful settings here, | |||
'''Acrylic (Perspex)''' | '''Acrylic (Perspex)''' | ||
{| class="wikitable" | {| class="wikitable" | ||
| Line 66: | Line 69: | ||
|100 | |100 | ||
|80 | |80 | ||
|} | |||
'''Other Materials''' | |||
{| class="wikitable" | |||
! style="text-align:left;" | Material | |||
! Speed (mm/sec) | |||
! Power (%) | |||
! Corner Power (%) | |||
|- | |||
|Correx 4mm | |||
|30 | |||
|100 | |||
|80 | |||
|- | |||
|Acrylic Outline | |||
|100 | |||
|30 | |||
|30 | |||
|} | |} | ||
Revision as of 19:42, 3 January 2015
If you experiment with different materials or speeds, please note down all successful settings here,
Acrylic (Perspex)
| Thickness (mm) | Speed (mm/sec) | Power (%) | Corner Power (%) |
|---|---|---|---|
| 2 | 50 | 100 | 80 |
| 3 | 35 | 100 | 80 |
| 5 | 15 | 100 | 80 |
| 10 | 5 | 100 | 80 |
Ply (Burch)
| Thickness (mm) | Speed (mm/sec) | Power (%) | Corner Power (%) |
|---|---|---|---|
| 2 | 60 | 100 | 80 |
| 3 | 55 | 100 | 80 |
| 6 | 15 | 100 | 80 |
MDF
| Thickness (mm) | Speed (mm/sec) | Power (%) | Corner Power (%) |
|---|---|---|---|
| 3 | 50 | 100 | 80 |
| 4 | 40 | 100 | 80 |
Other Materials
| Material | Speed (mm/sec) | Power (%) | Corner Power (%) |
|---|---|---|---|
| Correx 4mm | 30 | 100 | 80 |
| Acrylic Outline | 100 | 30 | 30 |
