Archive:CALMU3

From London Hackspace Wiki
No edit summary
No edit summary
Line 14: Line 14:
* Infrared '''PACT''' port (this is a standard - [http://www.abacuselectrics.com/pacta12a.htm possible adapter])
* Infrared '''PACT''' port (this is a standard - [http://www.abacuselectrics.com/pacta12a.htm possible adapter])
* Serial port ("for PC, modem or [http://www.securetogether.com/PACTLAN.aspx PACTLAN]")
* Serial port ("for PC, modem or [http://www.securetogether.com/PACTLAN.aspx PACTLAN]")
 
<s>
== Software with support ==
== Software with support ==
* Principal (DOS) or [ftp://81.142.225.250/EASEii/ Ease II] (can't get this to run on XP due to .vbx; probably needs 2000; uses stopcopy protection) from PRI
* Principal (DOS) or [ftp://81.142.225.250/EASEii/ Ease II] (can't get this to run on XP due to .vbx; probably needs 2000; uses stopcopy protection) from PRI
* [http://www.herseymeters.com/prod_amr_mvrs.html mv-rs], and possibly other Itron stuff
* [http://www.herseymeters.com/prod_amr_mvrs.html mv-rs], and possibly other Itron stuff
* Ziphany http://www.ziphany.com/Files/Supported_Meters.pdf
* Ziphany http://www.ziphany.com/Files/Supported_Meters.pdf
 
</s>


== Resources ==
== Resources ==

Revision as of 17:00, 6 November 2010

Calmu3 (possibly Calmu3+) from Polymeters Response International. "The first microprocessor-based meter", using "FFT, rather than 'brute-force' DSP" [1]

I think I read somewhere that Calmu3 (minus the +) lacks CoP5 approval, but the picture in the manual shows the same as ours.

It may need calibration periodically, but that's probably up to the supplier.

Details

  • Serial no: P99A01869
  • Part no: C3DBD0BC0SJ (3 phase direct, class 1 accuracy, lithium backup, C?)

Interfaces

Software with support

Resources

A later model, with overview.

Presumably ex-PRI consultant on Calmu meters


Serial protocol

1200bps ASCII, \r terminated

Equals symbols are shown on some variables, but presumably wouldn't fit for many.

Once a 'N', 's', 'u' or 'x' are matched, all the remainder of the line is ignored. This suggests they might be for switching to a different protocol, or buggy code. 'u' is definitely buggy.

Commands

F Frequency, updated per sample "F=50.138\r"
N Switch protocol? ff
R (Real?) time "R=15:00:40\r"
S Serial number (presumably "=" doesn't fit) "SP99A01869\r"
s ? "s=", dword 0xa605019e, dword 0, "\r"
u (probably unimplemented) "U\r"
x Switch protocol? ff
B[AVWvw] ?

  • "BAA3123B"
  • "BV182B85"
  • "BW918D2F"
  • "Bv05B6CE"
  • "Bw01B525"

I[123] Current

  • "I1+15.230"
  • "I2+0.0000"
  • "I3-0.0300"

K[123AVW] ?

  • "K1+2.0700"
  • "K2+0.0000"
  • "K3+0.0100"
  • "KA+2.0600"
  • "KV-1.3300"
  • "KW+1.6300"

L[123] Load?

  • "L1+9.0200"
  • "L2+0.0100"
  • "L3+0.0200"

P[123] ?

  • "P1+1.6400"
  • "P2-0.0000"
  • "P3+0.0000"

Q[123A] ?

  • "Q1=0.769-"
  • "Q2=1.000+"
  • "Q3=1.000+"
  • "QA=0.787-"

U[AVWvw] Units

  • "UA=2631984"
  • "UV=0349470"
  • "UW=2549220"
  • "Uv=0177551"
  • "Uw=0000001"

V[123] Voltage

  • "V1+236.75"
  • "V2+240.72"
  • "V3+242.45"

i[123] Current?

  • "i1-5.6300"
  • "i2-0.0000"
  • "i3-0.0100"

p[123] ?

  • "p1-1.3400"
  • "p2+0.0000"
  • "p3-0.0100"

u[AVWvw] ?

  • "UA=2631986"
  • "UV=0349470"
  • "UW=2549221"
  • "Uv=0177552"
  • "Uw=0000001"

?

Showing 1 related entity.

...

Retrieved from ‘https://wiki.london.hackspace.org.uk/w/index.php?title=Archive:CALMU3&oldid=6011’