Project:Nanode Case

Nanode Case

2mm acrylic case cut on the LHS laser cutter. Designed to be small, light and able to have a removable lid.

Equipment:

• Superglue (to bond sides to base)
• 5 x 12mm M3 screws (3 to attach nanode to base plate, 2 for lid)
• 8 x M3 nut (2 for lid, 6 for base)
• A4 sheet of 2mm acrylic
• 4 x 6mm rubber foot pads

(DXF to follow shortly after a couple tweaks)