Silvertail A0 Laser Cutter/Cutting Parameters

Cutting

Acrylic (Perspex)

Thickness (mm)	Speed (mm/sec)	Power (%)	Corner Power (%)
2	50	100	80
3	30	100	80
4	20	100	80
5	15	100	80
6	10	100	80
10	5	100	80

Plywood

Birch

Thickness (mm)	Speed (mm/sec)	Power (%)	Corner Power (%)
2	60	100	80
3	55	100	80
6	15	100	80
8	10	100	80

Poplar/LitePly

Tested 7/1/2016, Grade B/BB sample

Thickness (mm)	Speed (mm/sec)	Power (%)	Corner Power (%)
3	60	100	80
9	20	100	80

MDF

Thickness (mm)	Speed (mm/sec)	Power (%)	Corner Power (%)
3	50	100	80
4	40	100	80
6	15	100	80
8	10	100	80

Card

Cardstock

Weight (gsm)	Speed (mm/sec)	Power (%)	Corner Power (%)
300	100	35	28

Corrugated Cardboard

Thickness (mm)	Speed (mm/sec)	Power (%)	Corner Power (%)
7	100	100	80

Acetate Sheets

Thickness (mm)	Speed (mm/sec)	Power (%)	Corner Power (%)
0.1	100	17	17

Etching

Vary power/speed for different depths

Material	Speed (mm/sec)	Power (%)
Anodized Aluminium	1000	35
Acrylic	800	40
Glass	800	55

Outlining

Material	Speed (mm/sec)	Power (%)	Corner Power (%)
Acrylic	100	30	30
Anodized Aluminium	100	30	30
Ply (light)	100	20	15
Ply (dark)	100	40	35
6mm MDF	100	40	35
6mm Acrylic	100	40	35

Other Materials

We start to see issues with the machine when trying to cut with speed higher than 100. To cut thin stencil material it's better to use engrave instead cutting mode.

Material	Speed (mm/sec)	Power (%)	Corner Power (%)
Correx 4mm	30	100	80
engrave coloured mount board 2mm	200	30
Acetate

Polypropylene - 5micron (.5mm)	Speed (mm/sec)	Power (%)	Corner Power (%)
Cutting	70	70	20
scoring (for folds)	100	30	20
engraving	800	40

Kerf

The kerf of 3mm acrylic at normal cutting speeds (35) is between 0.15 - 0.2mm.