Environmental Chamber: Difference between revisions

From London Hackspace Wiki

Line 42: Line 42:
The temperature shot up to 50degC quite rapidly then took a couple of minutes to get to 100degC. The XK1 led flashed when it was at 99.9degC. --AJP
The temperature shot up to 50degC quite rapidly then took a couple of minutes to get to 100degC. The XK1 led flashed when it was at 99.9degC. --AJP


Below is a manual for the controller in the oven. Please note that it is generic: it does not refer to this particular implementation... :)
Simple temperature-setting instruction:
Press and hold (3s ish) 'hand' button until the display shows 'SETP'.
Set required temperature using up and down arrow buttons.
Press and hold (1s) 'enter' button, twice.   --PaddyD


[[Media:b70.6040gb_DICON_PRS_09.90.pdf]]
Below is a manual for the controller in the oven. Please note that it is generic: it does not refer to this particular implementation... :)
 
[[Media:b70.6040gb_DICON_PRS_09.90.pdf]]   --PaddyD


==Rough Instructions==
==Rough Instructions==