Metal Lathe Training: Difference between revisions

Metal Lathe Training (view source)

44 bytes added , 25 March 2022

no edit summary

583

edits

Revision as of 08:52, 25 March 2022 (view source) Toby.m (talk \| contribs) No edit summary ← Older edit		Revision as of 09:02, 25 March 2022 (view source) Toby.m (talk \| contribs) No edit summary Newer edit →
Line 1:		Line 1:

	This page is to information for people who are interested in the lathe. If you have previous experience you will normally be allowed to use the lathe after a induction session (to cover any queries and provide a brief guide.		This page is to information for people who are interested in the [[Equipment/Colchester Master Lathe\|metal lathe]]. If you have previous experience you will normally be allowed to use the lathe after a induction session (to cover any queries and provide a brief guide.

	The problem with these machines is that there are hundreds of techniques to learn and much needs to be done hands-on, so it isn't practical to run lectures. Most people will have knowledge only of the techniques that they have needed to date.		The problem with these machines is that there are hundreds of techniques to learn and much needs to be done hands-on, so it isn't practical to run lectures. Most people will have knowledge only of the techniques that they have needed to date.