Project:Nanode Case

From London Hackspace Wiki
Revision as of 22:23, 28 June 2011 by Ascen (talk | contribs) (Created page with "== Nanode Case == 2mm acrylic case cut on the LHS laser cutter. Designed to be small, light and able to have a removable lid. Equipment: * Superglue (to bond sides to base) *...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Nanode Case

2mm acrylic case cut on the LHS laser cutter. Designed to be small, light and able to have a removable lid.

Equipment:

  • Superglue (to bond sides to base)
  • 5 x 12mm M3 screws (3 to attach nanode to base plate, 2 for lid)
  • 8 x M3 nut (2 for lid, 3 for base)
  • A4 sheet of 2mm acrylic
  • 4 x 6mm rubber foot pads

(DXF to follow shortly after a couple tweaks)

Nanode Case 1
Nanode Case 2
Nanode Case 3
Retrieved from ‘https://wiki.london.hackspace.org.uk/w/index.php?title=Project:Nanode_Case&oldid=15952’