Equipment/Scrollsaw

Status

Scrollsaw currently not working due to a broken blade. Blade needs to be removed and length measured so that a replacement can be bought. Possible blades identified below

Model

unknown

Instructions

Mind your fingers!

Cutting

If in doubt then please ask Please only cut thin/small peices of wood or similar soft materials.

Changing the blade

Always observe the safety precautions described below.

Tools required: 5mm allen key, gloves, safety glasses

1. Disconnect the saw from the mains.
2. Wear gloves and eye protection at all times - this includes anyone helping or watching.
3. <need more info>
4. Using some tape, make a note on the machine of the current blade TPI.
5. From a safe position, reconnect the power and activate the saw to verify that it is running correctly.

Consumables

• Purchasing:

http://www.screwfix.com/search.do?fh_search=scrollsaw+blade