Silvertail A0 Laser Cutter/Cutting Parameters
< Silvertail A0 Laser Cutter
Jump to navigation
Jump to search
Revision as of 19:45, 3 January 2015 by YetiFiasco (talk | contribs)
If you experiment with different materials or speeds, please note down all successful settings here,
Acrylic (Perspex)
Thickness (mm) | Speed (mm/sec) | Power (%) | Corner Power (%) |
---|---|---|---|
2 | 50 | 100 | 80 |
3 | 35 | 100 | 80 |
5 | 15 | 100 | 80 |
10 | 5 | 100 | 80 |
Ply (Burch)
Thickness (mm) | Speed (mm/sec) | Power (%) | Corner Power (%) |
---|---|---|---|
2 | 60 | 100 | 80 |
3 | 55 | 100 | 80 |
6 | 15 | 100 | 80 |
MDF
Thickness (mm) | Speed (mm/sec) | Power (%) | Corner Power (%) |
---|---|---|---|
3 | 50 | 100 | 80 |
4 | 40 | 100 | 80 |
Etching
Material | Speed (mm/sec) | Power (%) | Corner Power (%) |
---|
Other Materials
Material | Speed (mm/sec) | Power (%) | Corner Power (%) |
---|---|---|---|
Correx 4mm | 30 | 100 | 80 |
Acrylic Outline | 100 | 30 | 30 |