DNA extraction and precipitation with ethanol / isopropanol

• Get DNA sample from previous extraction.
• Add 1 part proteinase K (1mg/ml stock solution) to 3 parts sample. Incubate at 50˚C for 1 hour and then heat-inactivate proteinase K at 94˚C for 10 min.
• Add 1/10th volume 3M sodium acetate pH 5.5. Mix by inverting tube.
• Add 2-3 volumes of cold 95-100% ethanol. Mix by inverting tube.
• Spin in microcentrifuge at 13,000 rpm (if possible at 4˚C) for 10-15 min.
• Aspirate supernatant carefully not to disturb pellet.
• Add 500 µl 70% ethanol (stored at -20˚C).
• Spin in microcentrifuge at 13,000 rpm for 2 min.
• Aspirate supernatant. Dry pellet at room temperature for 10 min (can be heated gently).
• Resuspend in water or TE buffer. TE buffer is generally preferred, because the DNA would be more stable. If the sample does not redissolve it can be heated at 50-60˚C for half an hour to help it.