Latest revision as of 09:31, 14 May 2024

ALL WORK IN PROGRESS _____________________________________________________

Following the move to EX2, it's now a requirement of our H&S policy that all members (new or old) get an induction to the space. As well as increasing safety, we hope it can also increase the sense of 'knowing what's going on' compared to the informal old system.

During an induction the following script will be run through, ensuring all points are met. The bullet points may well strike a more in-depth discussion if required.

Please note this induction does not cover details of using Equipment in the space - members should ask for help and/ or a separate training session as required.

Induction Script

Brief Introduction to LHS

Community not-for-profit organisation - see full descriptions on wiki main page etc
Currently one of several small business/ community minded tenants in the EX2 building

Access

The main entrance to the Hackspace during working hours is through the large opening with clear plastic doors (first that you pass as you come up the Alleyway)
You enter initially to the general EX2 space - LHS is immediately on the left with swipe card access
Out of working hours a roller shutter is closed
The alternative entrance (available at all times) is a metal door slightly further down the alley, which enters directly into the hackspace

Exit

LOCKUP PROCEDURE TBC

Facilities

The building has shared kitchen and toilet facilities (due to be upgraded at some point)
Take members on a brief tour

Workshop Safety

Read the Health & Safety Policy in full
Discuss ACNodes. Highlight that not all training tools are ACNoded
Discuss noise /dust mitigation - keep doors closes, shout warning before using loud tools
Keep fire passages clear
Locations of fire fighting equipment
Locations of PPE Stores

Cleanliness

LHS doesn't work if people don't clear up after themselves
Especially as a new member, it's one of the best ways you can help
Sweep dust after woodwork activities

Behaviour

Read the Code of Conduct in full
Raise awareness of the other policies on the Main Page
If there's a shortage of something, replace it yourself (preferred) or post on Discord/ mailing list but don't just walk away

Storage

Read Guides/Bringing items to the space

End of Induction

1) Members and inductors should sign and file a copy of the Induction Form

2) Paper form should be stored in the appropriate folder

3) Activate access cards. Members are now inducted!

@@ Line 1: / Line 1: @@
-This is a page to develop ideas for an induction programme for new members and a re-orientation programme for old members
+ALL WORK IN PROGRESS
+_____________________________________________________
-= What the London Hackspace is/isn't =
+Following the move to EX2, it's now a requirement of our H&S policy that all members (new or old) get an induction to the space. As well as increasing safety, we hope it can also increase the sense of 'knowing what's going on' compared to the informal old system.
-The hackspace is a social group first : it can't exist without a number of people working together to finance and maintain it. If the community doesn't prosper, neither will the hackspace.
+During an induction the following script will be run through, ensuring all points are met. The bullet points may well strike a more in-depth discussion if required.
-You can't benefit from a community without contributing to it. Not just financially, but in creating goodwill, pooling your skills and knowledge and doing your bit in maintenance and repair.
+Please note this induction does not cover details of using [[Equipment]] in the space - members should ask for help and/ or a separate training session as required.
+=Induction Script=
-==IS ==
+==Brief Introduction to LHS==
-* A place for people to work on projects they're interested in - We provide a space for members to work on almost any project that interests them and provide the tools to help them do so.
+* Community not-for-profit organisation - see full descriptions on wiki main page etc
-* A place to socialize with like-minded people - We have open evenings which also provide a social venue for members to meet up and discuss what they're working on.
+* Currently one of several small business/ community minded tenants in the EX2 building
-* A place to repair, improve or re-purpose things - We keep an extensive collection of tools that can be used to repair and hack equipment to make it last longer or be more useful and our members often help each other with repairs.
-* A group to share knowledge and experience - We can find an expert on almost anything technical (and a lot of other things) within our membership, and most of them are very willing to share and teach
-* A way to learn and teach new skills - Our members provide inductions and other training on most of our equipment, as well as workshops to demonstrate and teach new skills we dont have technicians etc
-* A place to work collaboratively on projects with friends - We provide a venue for groups of members to meet up and work on projects that would otherwise be hard to arrange.
-* You need to be a current paid up member to use Hackspace resources this includes tools, internet and materials.
-== Is Not ==
+==Access==
+* The main entrance to the Hackspace during working hours is through the large opening with clear plastic doors (first that you pass as you come up the Alleyway)
+* You enter initially to the general EX2 space - LHS is immediately on the left with swipe card access
+* Out of working hours a roller shutter is closed
+* The alternative entrance (available at all times) is a metal door slightly further down the alley, which enters directly into the hackspace
-This is the fifth building used by the hackspace. Only a tiny fraction of members can be present at a time : the real hackspace community is composed of everyone helping pay and organise it. The people online have just as much right to an opinion as those in the physical workshop.
+==Exit==
-* A pay-as-you-go workshop - Although we're very flexible on membership contributions and require no long-term commitments, we do expect that being an London Hackspace member is an ongoing process of contributing to the hackspace. Contributing only when you want to make use of the hackspace facilities is discouraged.
+* LOCKUP PROCEDURE TBC
-* A co-working space – whilst you may be able to sit down and do some work on a small scale you will very quickly find it is not suited to having meetings, conference calls etc the network may drop out, there will be noise and interruptions
-* A laser cutting/CNC machining/etc service - We do not provide commercial services to the public, and we have a shared machine that many members will want to use
-* A charity - Although we very much welcome donations and assistance, we are not a registered charity and are structured more like a social club.
-* A storage area - We have a small amount of space to store ongoing member projects and we're happy to have tools that are being regularly used, however we are very space limited and do not provide long-term storage.
-* A business incubator - We're happy to support local businesses where we can
-* A tool hire centre - Our tools are kept at the hackspace and are not loaned out to members.
-* The Repair Shop  wanting to repair stuff are very welcome to become members and get full access to our facilities. If you join up, we may help you fix it, if someone is around and they have time but we won't fix it for you.
-* A source of free materials – You should bring your own materials if people have useable materials left over they can leave them for other member and other members should make a donation to the space to the value of the materials – it is one of the ways we support our selves
-* A waste disposal service – Because it does not fit in your bin at home does not mean the space will find it valuable or useful
-Other people with different levels of comfort, cleanliness, and decorum are using the space alongside you. This isn't your home, this is a community you are a part of.
+==Facilities==
-== Rules and Expected Behaviour ==
+* The building has shared kitchen and toilet facilities (due to be upgraded at some point)
-https://wiki.london.hackspace.org.uk/view/Rules
+* Take members on a brief tour
-= The Workshop =
+==Workshop Safety==
-* Basic safety
-No equipment is to be used with out first inspecting it to ensure that it is safe to use
-You are under no circumstances to use any equipment unless you are competent to do so
-* Tool use and care
+* Read the [[Policy/ Health & Safety Policy|Health & Safety Policy]] in full
-All work areas are to be cleaned after use and all equipment to be placed back in the correct place after use
+* Discuss ACNodes. Highlight that not all training tools are ACNoded
+* Discuss noise /dust mitigation - keep doors closes, shout warning before using loud tools
+* Keep fire passages clear
+* Locations of fire fighting equipment
+* Locations of PPE Stores
+==Cleanliness==
+* LHS doesn't work if people don't clear up after themselves
+* Especially as a new member, it's one of the best ways you can help
+* Sweep dust after woodwork activities
+==Behaviour==
+* Read the [[Code of Conduct]] in full
+* Raise awareness of the other policies on the [[Main Page]]
+* If there's a shortage of something, replace it yourself (preferred) or post on Discord/ mailing list but ''don't'' just walk away
+== Storage ==
+* Read [[Guides/Bringing items to the space]]
+=End of Induction=
+) Members and inductors should sign and file a copy of the [[Policy/ Space Induction Form|Induction Form]]
+) Paper form should be stored in the appropriate folder
+) Activate access cards. Members are now inducted!

Difference between revisions of "Induction"