Difference between revisions of "Project:Gel electrophoresis box"
Jump to navigation
Jump to search
Mycoplasma (talk | contribs) (Created page with "[http://www.pearlbiotech.com/ Open Source Electrophoresis tanks] - They sell kits, but we can probably just use their published plans to laser-cut our own. Also [http://learn.gen...") |
Mycoplasma (talk | contribs) |
||
| Line 1: | Line 1: | ||
| + | * 7 / Apr / 2011: Photos from the outer box construction are here: http://lardcave.net/biohacking/ | ||
| + | * 13 April 2001: Photos of the [http://www.flickr.com/photos/dekstop/sets/72157626368045215/ first Electrophoresis experiment] | ||
| + | |||
| + | We've made one. Measurements for the outer box, in mm: | ||
| + | Width: 102.45 to 102.9 (not a perfect glue job) | ||
| + | Height to top (container): 31.8 | ||
| + | Height to top holes (for electrodes): 22.16 | ||
| + | Depth: about 171 | ||
| + | Thickness (of the perspex): about 3.2 | ||
| + | |||
| + | Measurements for the inner box (which we ended up using, roughly): | ||
| + | Width: 100 | ||
| + | Height to top: 20 | ||
| + | Depth: 100 | ||
| + | |||
| + | So that is two panels measuring 100 x 20 (for the sides), and one panel measuring 100 x 100 (for the bottom). | ||
| + | |||
| + | |||
[http://www.pearlbiotech.com/ Open Source Electrophoresis tanks] - They sell kits, but we can probably just use their published plans to laser-cut our own. Also [http://learn.genetics.utah.edu/content/labs/gel/gelchamber/] | [http://www.pearlbiotech.com/ Open Source Electrophoresis tanks] - They sell kits, but we can probably just use their published plans to laser-cut our own. Also [http://learn.genetics.utah.edu/content/labs/gel/gelchamber/] | ||
Revision as of 21:21, 8 August 2012
- 7 / Apr / 2011: Photos from the outer box construction are here: http://lardcave.net/biohacking/
- 13 April 2001: Photos of the first Electrophoresis experiment
We've made one. Measurements for the outer box, in mm:
Width: 102.45 to 102.9 (not a perfect glue job) Height to top (container): 31.8 Height to top holes (for electrodes): 22.16 Depth: about 171 Thickness (of the perspex): about 3.2
Measurements for the inner box (which we ended up using, roughly):
Width: 100 Height to top: 20 Depth: 100
So that is two panels measuring 100 x 20 (for the sides), and one panel measuring 100 x 100 (for the bottom).
Open Source Electrophoresis tanks - They sell kits, but we can probably just use their published plans to laser-cut our own. Also [1]