Difference between revisions of "Project:Gel electrophoresis box"
Jump to navigation
Jump to search
Mycoplasma (talk | contribs) |
Mycoplasma (talk | contribs) |
||
Line 15: | Line 15: | ||
So that is two panels measuring 100 x 20 (for the sides), and one panel measuring 100 x 100 (for the bottom). | So that is two panels measuring 100 x 20 (for the sides), and one panel measuring 100 x 100 (for the bottom). | ||
− | |||
* 13 April 2011: Photos of the [http://www.flickr.com/photos/dekstop/sets/72157626368045215/ first Electrophoresis experiment] | * 13 April 2011: Photos of the [http://www.flickr.com/photos/dekstop/sets/72157626368045215/ first Electrophoresis experiment] | ||
*13-04-2011 [[Project:Biohacking/20110413|First attempt at electrophoresis of DNA on agarose gel]] | *13-04-2011 [[Project:Biohacking/20110413|First attempt at electrophoresis of DNA on agarose gel]] |
Revision as of 22:00, 8 August 2012
We made our own electrophoresis box with a laser cutter.
Measurements for the outer box, in mm:
Width: 102.45 to 102.9 (not a perfect glue job) Height to top (container): 31.8 Height to top holes (for electrodes): 22.16 Depth: about 171 Thickness (of the perspex): about 3.2
Measurements for the inner box (which we ended up using, roughly):
Width: 100 Height to top: 20 Depth: 100
So that is two panels measuring 100 x 20 (for the sides), and one panel measuring 100 x 100 (for the bottom).
- 13 April 2011: Photos of the first Electrophoresis experiment
- 13-04-2011 First attempt at electrophoresis of DNA on agarose gel
Open Source Electrophoresis tanks - They sell kits, but we can probably just use their published plans to laser-cut our own. Also [1]