Difference between revisions of "Project:HM55B"
Jump to navigation
Jump to search
| Line 18: | Line 18: | ||
\[/_\/_\/_\/_\&:10] | \[/_\/_\/_\/_\&:10] | ||
| − | + | The delay may not be needed. | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Take sample (1100 is the response for success, 00xx is for incomplete, xx11 is error, see p9 of datasheet) | Take sample (1100 is the response for success, 00xx is for incomplete, xx11 is error, see p9 of datasheet) | ||
| Line 71: | Line 54: | ||
Note that &:50000 isn't enough of a delay, but && works, presumably because BusPirate parser adds a huge delay. This means that we don't know how fast this module can be clocked, because each ! will be > 50ms apart. | Note that &:50000 isn't enough of a delay, but && works, presumably because BusPirate parser adds a huge delay. This means that we don't know how fast this module can be clocked, because each ! will be > 50ms apart. | ||
| + | |||
| + | We could test this with: | ||
| + | |||
Sample values: | Sample values: | ||
Revision as of 00:03, 3 September 2010
Module
$20-25 compass module for embedded systems. SMD will be cheaper.
Testing with the BusPirate
BusPirate settings:
- M (mode)
- 8 (3-wire raw)
- 4 (400KHz)
- 2 (3.3V high)
- W (turn on 5V output)
Reset:
\[/_\/_\/_\/_\&:10]
The delay may not be needed.
Take sample (1100 is the response for success, 00xx is for incomplete, xx11 is error, see p9 of datasheet)
\[/-\/_\/_\/_\&&]&:10[&:10/-\/-\/_\/_\!!!!&!!!!!!!!!!!&!!!!!!!!!!!]
READ BIT: 1 READ BIT: 1 READ BIT: 0 READ BIT: 0 DELAY 0b00000001uS READ BIT: 0 READ BIT: 0 READ BIT: 0 READ BIT: 0 READ BIT: 0 READ BIT: 0 READ BIT: 1 READ BIT: 0 READ BIT: 0 READ BIT: 0 READ BIT: 0 DELAY 0b00000001uS READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 0 READ BIT: 0
Note that &:50000 isn't enough of a delay, but && works, presumably because BusPirate parser adds a huge delay. This means that we don't know how fast this module can be clocked, because each ! will be > 50ms apart.
We could test this with:
Sample values:
0,-6
-1,-11
-1,-19