Difference between revisions of "Project:HM55B"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
| − | == | + | == About the module == |
$20-25 compass module for embedded systems. SMD will be cheaper. | $20-25 compass module for embedded systems. SMD will be cheaper. | ||
| Line 6: | Line 6: | ||
| − | + | == Testing with the BusPirate == | |
| − | + | Settings: | |
| − | * M (mode) | + | * '''M''' (mode) |
| − | * 8 (3-wire raw) | + | * '''8''' (3-wire raw) |
| − | * 4 (400KHz) | + | * '''4''' (400KHz) |
| − | * 2 (3.3V high) | + | * '''2''' (3.3V high) |
| − | * W (turn on 5V output) | + | * '''W''' (turn on 5V output) |
| − | Reset | + | === Reset=== |
\[/_\/_\/_\/_\&:10] | \[/_\/_\/_\/_\&:10] | ||
The delay may not be needed. | The delay may not be needed. | ||
| − | Take sample | + | === Take sample === |
| + | 1100 is the response for success, 00xx is for incomplete, xx11 is error, see p9 of datasheet) | ||
\[/-\/_\/_\/_\&&]&:10[&:10/-\/-\/_\/_\!!!!&!!!!!!!!!!!&!!!!!!!!!!!] | \[/-\/_\/_\/_\&&]&:10[&:10/-\/-\/_\/_\!!!!&!!!!!!!!!!!&!!!!!!!!!!!] | ||
| Line 60: | Line 61: | ||
[0b1000 && ]&[& 0b1100 r:4] | [0b1000 && ]&[& 0b1100 r:4] | ||
| − | + | Sample readings: | |
| − | Sample | ||
0,-6 | 0,-6 | ||
Revision as of 00:15, 3 September 2010
About the module
$20-25 compass module for embedded systems. SMD will be cheaper.
Testing with the BusPirate
Settings:
- M (mode)
- 8 (3-wire raw)
- 4 (400KHz)
- 2 (3.3V high)
- W (turn on 5V output)
Reset
\[/_\/_\/_\/_\&:10]
The delay may not be needed.
Take sample
1100 is the response for success, 00xx is for incomplete, xx11 is error, see p9 of datasheet)
\[/-\/_\/_\/_\&&]&:10[&:10/-\/-\/_\/_\!!!!&!!!!!!!!!!!&!!!!!!!!!!!]
READ BIT: 1 READ BIT: 1 READ BIT: 0 READ BIT: 0 DELAY 0b00000001uS READ BIT: 0 READ BIT: 0 READ BIT: 0 READ BIT: 0 READ BIT: 0 READ BIT: 0 READ BIT: 1 READ BIT: 0 READ BIT: 0 READ BIT: 0 READ BIT: 0 DELAY 0b00000001uS READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 1 READ BIT: 0 READ BIT: 0
Note that &:50000 isn't enough of a delay, but && works, presumably because BusPirate parser adds a huge delay. This means that we don't know how fast this module can be clocked, because each ! will be > 50ms apart.
The BusPirate wiki suggests this will work (since we've determined that it still provides the 22 sample bits even if the reading is incomplete):
\[0b0000 &] [0b1000 && ]&[& 0b1100 r:4]
Sample readings:
0,-6
-1,-11
-1,-19