Difference between revisions of "Project:LaserCutterBackplate"

From London Hackspace Wiki
Jump to navigation Jump to search
Line 11: Line 11:
 
==Materials==  
 
==Materials==  
  
−
I'm thinking about getting 2 sheets of 4mm perspex from Hamar.
+
Ordered 3 A3 4mm panels.  
  
−
We also need hinges? And a lock? Need to have a look inside at some point.
+
So planning 2 420 mm panels or 3 smaller ones.
 +
 
 +
Need to check rivets and rivetting tools in stock, to see if they are sufficient.

Revision as of 13:06, 17 February 2011

Measurements

For material purchase only. Measure again before cutting. Length: 113.7MM 11.8cm 13.4cm

Curve width: 2.5 inches - not the most useful of measurements I'll take better when the laser cutter is not being used.

Materials

Ordered 3 A3 4mm panels.

So planning 2 420 mm panels or 3 smaller ones.

Need to check rivets and rivetting tools in stock, to see if they are sufficient.

Retrieved from ‘https://wiki.london.hackspace.org.uk/w/index.php?title=Project:LaserCutterBackplate&oldid=10707’