Difference between revisions of "Project:MSP430 Mac Howto"
Jump to navigation
Jump to search
m |
|||
| Line 6: | Line 6: | ||
== Building Toolchain == | == Building Toolchain == | ||
| − | Make sure you have Xcode installed (for GCC et al) | + | * Make sure you have Xcode installed (for GCC et al) - you can download it from the App Store |
| + | * Install wget - just download (e.g. http://ftp.gnu.org/gnu/wget/wget-1.13.tar.gz) and compile: | ||
| + | $ ./configure --without-ssl | ||
| + | $ sudo make install | ||
| + | |||
Download the toolchain and bunutils: | Download the toolchain and bunutils: | ||
$ git clone git://mspgcc4.git.sourceforge.net/gitroot/mspgcc4/mspgcc4 | $ git clone git://mspgcc4.git.sourceforge.net/gitroot/mspgcc4/mspgcc4 | ||
| − | Fix to | + | Fix to binutils version: |
| − | + | Change line 136 in <code>mspgcc4/buildgcc.pl<code> to: <code>$BINUTILS_VERSION = "2.21.1";</code> | |
| − | |||
| − | Change line 136 in <code>mspgcc4/buildgcc.pl<code> to: $BINUTILS_VERSION = "2.21.1"; | ||
Revision as of 20:03, 1 November 2011
This page documents Flux's attempt to get the TI LaunchPad working on a MacBook Air running Mac OS X Lion 10.7.2.
USB Driver
- Downloaded binary from http://e2e.ti.com/support/interface/digital_interface/f/130/t/55982.aspx
- Installed as per included instructions
Building Toolchain
- Make sure you have Xcode installed (for GCC et al) - you can download it from the App Store
- Install wget - just download (e.g. http://ftp.gnu.org/gnu/wget/wget-1.13.tar.gz) and compile:
$ ./configure --without-ssl $ sudo make install
Download the toolchain and bunutils:
$ git clone git://mspgcc4.git.sourceforge.net/gitroot/mspgcc4/mspgcc4
Fix to binutils version:
Change line 136 in mspgcc4/buildgcc.pl to: $BINUTILS_VERSION = "2.21.1";